Abstract

Most of the researches published on the numerical modeling of laser welding are looking at similar welding, mainly due to the difficulty of simulating the mixing phenomenon that occurs in dissimilar welding. Furthermore, numerical modeling of dissimilar laser welding of titanium and nickel alloys has been rarely reported in the literature. In this study, a 3D finite volume numerical model is proposed to simulate fluid flow, heat, and mass transfer for similar and dissimilar laser welding of Ti-6Al-4V and Inconel 718. The laser source was simulated by volumetric heat distribution, which considers the effects of keyhole and heat transfer on the workpiece. The heat source parameters were calibrated through preliminary experiments, by comparing the simulated and experimental weld pool shapes and dimensions. The model was used to simulate both homogenous and dissimilar laser weldings of Ti-6Al-4V and Inconel 718, and a systematic comparison was carried out through a number of selected experiments. The effects of three distinct levels of laser power (1.25 kW, 1.5 kW, 2.5 kW) on temperature distribution and velocity field in the welds pool were analyzed. Results highlighted the effects of Marangoni forces in the weld pool formation. Furthermore, in order to analyze the mass transfer phenomenon in dissimilar welding, species transfer equations were considered, demonstrating the important role played by the mass mixture in the weld pool formation. Finally, a high level of agreement between simulations and experiments—in terms of weld pool shape and dimensions—was observed in all cases analyzed. This proves the ability of the proposed numerical model to properly simulate both the similar and dissimilar welding of Ti-6Al-4V and Inconel 718 alloys.

Highlights

  • The laser welding process is widely used in many industries, including automotive, oil and gas, shipbuilding, and aerospace industries, due to its economic and technological advantages [1, 2]

  • We developed a three-dimensional numerical model to simulate the laser welding of titanium and nickel alloys butt welding

  • Temperature history, mass distribution, and velocity field in the weld pool were evaluated in three welding cases: the autogenous laser welding of Ti-6Al-4V, the autogenous laser welding of Inconel 718, and the dissimilar laser welding of Ti-6Al-4V and Inconel 718

Read more

Summary

Introduction

The laser welding process is widely used in many industries, including automotive, oil and gas, shipbuilding, and aerospace industries, due to its economic and technological advantages [1, 2]. Nickel alloys have been increasingly used in similar fields due to their excellent mechanical properties at high temperatures. The laser welding of titanium and nickel alloys has been of growing interest for industrial applications, most notably in the aerospace industry, where it can be used to manufacture parts destined for high-temperature regions of the engine and turbine [5, 6]. The use of dissimilar welding in place of similar welding requires challenging concerns that arise for two important reasons: the different thermo-physical properties of the base materials can affect heat transfer in the weld pool; the mixing process in the weld pool changes its composition, with consequences visible in both the heat transfer and fluid flow [8]

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call