Abstract
Nowadays, many cold storage applications require varied types of cooling loads to be connected to same refrigeration system. This shall be accomplished by feeding refrigerant to multi-evaporators. A bi-evaporator single compression system with individual expansion valves or with multiple arrangement of expansion valves is commonly used to meet this requirement. With increasing demand for energy conservation, it is necessary to further improve the efficiency of these types of refrigeration systems. One such method is using a two-phase ejector as expansion device in place of expansion valve, to enhance the system performance. Performance of this ejector-bi-evaporator compression refrigeration system will be assessed by carrying out energy analysis by means of numerical simulation in MATLAB and comparing with that of conventional expansion valve-bi-evaporator compression refrigeration system. R134a will be used as working fluid and the effect of evaporator temperature and condenser temperature on cooling capacity and coefficient of performance will be studied.Nowadays, many cold storage applications require varied types of cooling loads to be connected to same refrigeration system. This shall be accomplished by feeding refrigerant to multi-evaporators. A bi-evaporator single compression system with individual expansion valves or with multiple arrangement of expansion valves is commonly used to meet this requirement. With increasing demand for energy conservation, it is necessary to further improve the efficiency of these types of refrigeration systems. One such method is using a two-phase ejector as expansion device in place of expansion valve, to enhance the system performance. Performance of this ejector-bi-evaporator compression refrigeration system will be assessed by carrying out energy analysis by means of numerical simulation in MATLAB and comparing with that of conventional expansion valve-bi-evaporator compression refrigeration system. R134a will be used as working fluid and the effect of evaporator temperature and condenser temperature on cooling cap...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.