Numerical Investigations on Effect of Inflow Parameters on Development of Secondary Flow Field for Linear LP Turbine Cascade

Abstract

Abstract End wall flows contribute the most crucial role in loss generation for axial flow turbine and compressor blades. These losses lead to modify the blade loading and overall performance in terms of stable operating range. Present study aimed to determine the end wall flow streams in a low speed low pressure linear turbine cascade vane using numerical approach. The study includes two sections. The first section includes an attempt to understand different secondary flow streams available at end wall. Location of generation of horseshoe vortex streams and subsequent vortex patterns are identified in the section. The selection of suitable turbulence model among SST (Shear Stress Transport) k–ω and SST γ–θ to identify end wall flow streams is studied in prior in the section. The steady state numerical study is performed using Reynolds Averaged Navier-Stoke’s Equations closed by SST γ–θ turbulence model. The computational results are validated with experimental results available in the literature and are found to be in good agreement. The study is extended for different inflow conditions in later section. The second section includes effect of flow incidence and turbulence intensity on the end wall secondary flow field. Inflow incidences considered for the study are −20°, −10°, 0° (design incidence), +10° and +20°. The inlet turbulence intensities are varied by 1% and 10% for each case. The results revealed different secondary flow patterns at an end wall and found the change in behavior with an inflow conditions. SST γ–θ turbulence model with lower turbulence intensity is more suitable to identify such flow behavior.