Numerical investigation on the interactions between rotating detonation wave complex and planar turbine cascade

Abstract

AbstractDue to pressure gain characteristics, the rotating detonation combustor (RDC) can be integrated into gas turbines by further improving the system's performance. The matching of unsteady flows in the RDC and turbine is a key challenge. Here, interactions in an RDC and planar turbine cascade are investigated using the unsteady Reynolds time‐averaged Navier‐Stokes method. The effects of the blade profiles on interactions between the oblique shock wave (OSW) and turbine cascade are analyzed, and the suppression effect of the turbine cascade on high‐frequency pressure oscillations is evaluated. The results show that the OSW interacts with the leading edge, pressure side, suction side, and trailing edge of the turbine stator and rotor blades, which generates complex wave systems in the cascade passage. The opposite propagation direction causes the OSW to be aligned or misaligned with the stator blade. The position of the OSW that operates on the turbine cascade changes, and two different wave system structures appear. The various pitches of the turbine cascade at different blade heights cause differing intensities and propagation directions in the reflected wave as generated by the action of the OSW and turbine cascade and the variable flow fields at different blade heights. The turbine cascade can significantly suppress the high‐frequency pressure oscillations, while the pressure amplitude attenuation rate can reach over 80% when the OSW propagates through the turbine cascade. These findings expound on the interaction mechanism between the rotating detonation wave complex and the turbine stator and rotor blades.