Abstract
The stress concentration factors (SCFs) is used in the fatigue design for calculating hot-spot stress. However a major issue can be noted that the majority of research results are focused on the SCF distribution of uni-planar tubular joints subjected to the single basic load. By aiming to find the solution of this problem, the distribution of SCFs at the weld toe of a multi-planar tubular DX-joint which is subjected to the two set of the balanced combined loading components at the end of in-plane braces is studied by the finite element method. Thus it is concluded that for the axial plus in-plane bending load case, hot-spot stress location varies between saddle and crown position; while the location is invariably at the saddle position under combined axial plus out-of-plane bending loads. At last the API RP2A equation for predicting hot-spot stress is used for comparison with the finite element analysis results. Meanwhile the distribution of SCFs is also provided, that information indicates the-hot spot location along the weld toe affects the crack initiation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have