Abstract
Self-compacting filling material or controlled low-strength material (CLSM) is a cementitious material which is liquid during filling, and it is used primarily as backfill, e.g., in trenches. Several products are currently used as CLSM such as flowable fill, controlled density fill, flowable mortar and low-strength plastic soil–cement. The low-strength requirement is necessary to allow for future excavation of CLSM. A two-dimensional numerical model was developed using the finite element system ABAQUS. In this model, the material behavior of granular soil and CLSM is described using an elasto-plastic constitutive model with Mohr–Coulomb failure criterion. Rigid and flexible pipes were modeled once embedded in sandy soil and once embedded in self-compacting material. The numerical model allows the modeling of the effect of hardening process on the overall behavior of the pipe–soil system. The main objective of this study is to investigate the behavior of rigid and flexible pipelines embedded in CLSM as a filling material numerically and to show advantages and disadvantages in comparison with the presently widely used filling materials like sand.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.