Numerical investigation of tubular structures generated by cutting method and pattern scale factor (PSF) method

Abstract

Purpose This paper aims to study the tensile performance, deformation characteristics, auxeticity and stability of different auxetic tubular structures generated by cutting method and pattern scale factor (PSF) method using validated finite element analysis. Design/methodology/approach Two types of auxetic tubular structures were designed by a coordinate transformation method and the PSF adjustment method, respectively. ABAQUS/explicit solver was used for the large deformation analysis and the displacement of key nodes was extracted to calculate Poisson’s ratio value and evaluate the deformation of tubular structures. Findings The random cut method was not suitable for designing auxetic tubular structures. Vertical and horizontal cut approach was suitable, but the change of the tubular diameter was lower than the tubular structures generated by the PSF adjustment method. Research limitations/implications Simple ways to generate auxetic tubular structure, which can be made into intelligent and foldable equipment, such as annuloplasty rings, angioplasty stents and oesophageal stents. By combined with shape memory polymer, various smart tubular materials and structures with various functions can be designed, especially in medical scaffold and other medical equipment fields. Originality/value The auxetic characteristic of tubular structure designed by using random cut method has been investigated for the first time. The outcome of this study would be very useful design tubular structures with better mechanical properties.