Abstract
In this paper, a numerical study is conducted to investigate the stress shadow effects (stress reorientation and change) during hydraulic fracturing in a transverse multiple fracture system. A numerical model is used for the numerical study. It is a 3D model and can simulate the fracture operation from injection begin to full closure (fracture contact). Therefore, there is no need to assume the fracture geometry for the investigation of the stress shadow effects (unlike previous studies). In the numerical study, the first and second operations in a fictive transverse multiple fracture system are simulated, meanwhile the stress shadow effects and their influences on the propagation and proppant placement of the second fracture are investigated. According to the results, the following conclusions are discerned: (1) most proppants are located in the lower part of the reservoir, even below the perforation; (2) the stress shadow effects are time-dependent and proppant dominated; (3) the stress shadow effects affect the fracture propagation and the proppant placement of the second fracture, and also the fracture conductivity of the first fracture; (4) the time-dependent stress shadow effects can be divided into four phases, fracture enlargement, closure without proppant contact, closure with proppant contact and full closure; and (5) the superposition effect of the stress shadow in a transverse multiple fracture system exists. According to the conclusions, some optimizations are recommended.
Highlights
Hydraulic fracturing is currently a hot topic in petroleum engineering
In a transverse multiple fracture system, the previous fracture may cause new fractures to deviate from the trajectory of the previous fracture
If the According to the results of the first operation, the stress shadow effect is time dependent
Summary
Hydraulic fracturing is currently a hot topic in petroleum engineering. It is the key technology to enhance the gas recovery in tight and shale gas reservoirs, especially when combined with horizontal well bores. With the support of injected solid proppant, a huge highly conductive channel is created; gas can be economically produced. A horizontal well bore makes it possible to set a fracture cluster in a reservoir; a large stimulated reservoir volume (SRV) is created. Many researchers focus on the optimization of the transverse multiple fracture system
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
