Abstract
This paper presents a numerical investigation of the R-curve effect in delamination propagation in composite materials. The R-curve effect refers to the phenomenon whereby resistance to crack propagation increases with the advancement of the delamination, due to toughening mechanisms, such as fiber bridging. Numerical models often neglect this effect assuming a constant value of the fracture toughness. A numerical approach based on cohesive elements and on the superposition of two bilinear traction-separation laws is adopted here to accurately predict the R-curve effect in skin-doubler composite specimens subjected to three-point bending tests. The carbon-epoxy material presents two different sensitivities to the fiber bridging phenomenon resulting in two different R-curves. Comparisons with literature experimental data, in terms of load and delaminated area vs. applied displacement, and ultrasonic C-scan images show the effectiveness of the adopted approach in simulating the R-curve effect. The predicted numerical stiffness aligns with the experimental scatter, although the maximum load is slightly underestimated by approximately 15% compared with the average experimental results. The numerical model accurately predict the R-curve effect observed in the experimental data, demonstrating a 31% increase in the maximum load for the material configuration exhibiting greater sensitivity to fiber bridging.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have