Abstract

In this study, three-dimensional numerical analyses were carried out to investigate the effects of reinforcement pullout resistance including facing connection strength on the behavior of geosynthetic-reinforced soil (GRS) piers under a service load condition. Three different piers were investigated in this study, which simulated different levels of reinforcement pullout resistance. Each pier had two cases with different reinforcement stiffness J and reinforcement spacing Sv but the same ratio of J/Sv. Numerical results showed that reinforcement pullout resistance had a significant effect on the behavior of GRS piers. When the pullout mode prevailed, the case with small Sv and low J had smaller lateral facing displacements and vertical strain of the pier under the same applied pressure as compared to the case with large Sv and high J when the ratio of J/Sv was kept constant. When the pullout mode did not prevail, two cases with the same ratio of J/Sv showed similar performance despite different combinations of Sv and J were used. To more effectively mobilize reinforcement strength and improve GRS pier performance, small reinforcement spacing or high-strength facing connection should be considered when sufficient reinforcement pullout resistance cannot be guaranteed otherwise.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call