Abstract
BackgroundTotal suspended solids (TSS) loads carried by stormwater runoff is a major pollutant source on receiving water bodies. Stormwater ponds are widely used for controlling TSS discharge. However, the trap efficiency is not satisfactory because it is affected by many complex factors, which are not fully understood. Therefore, there is a necessity to gain insight into the sediment process in stormwater ponds for optimization design of stormwater ponds. To address this issue, we propose a novel modeling framework based on discrete phase model (DPM), aiming to fully represent the sediment transport, settling, and resuspension at grain scale under time-dependent conditions.ResultsIn the newly proposed method, heterogeneous characteristics of sediments’ loads, varying flows and sediment loads, settling and resuspension effect at grain scale, time-dependent conditions, and turbulent effect are all well considered. The proposed models have been coded with C language and hooked in computational fluid dynamics software Fluent, and the methods were tested with a case of laboratory experimental setup. Different bed boundary conditions are tested and compared with the observation data for optimization parameters’ identification. The simulation results demonstrated that the physically based DPM with the newly developed method can well reproduce the evolution of sediment transport, settling and resuspension behaviors compared with the scale experiment.ConclusionsThe newly proposed method can accurately predict the trap efficiency and temporal–spatial sediment distribution. The decomposition of bed load motion at grain scale is a necessary and valid way to represent the sedimentation process in shallow ponds. The developed model could be a tool to help us gain insight into the sediment transport phenomena at grain scale in shallow tanks since it can provide detailed information which the experiment cannot.
Highlights
Total suspended solids (TSS) loads carried by stormwater runoff is a major pollutant source on receiv‐ ing water bodies
Birch et al [9], for instance, reported the range varying from − 12 to 93%, while Gonzalez-Merchan [10] estimated the annual removal efficiency of TSS in Django Reinhardt detention basin located at Lyon in France, varying from 33 to 75%, according to in situ monitoring data during the year of 2004–2010
This study focuses on the development and the assessment of a physically based approach to represent the sediment transport, settling and resuspension
Summary
Total suspended solids (TSS) loads carried by stormwater runoff is a major pollutant source on receiv‐ ing water bodies. There is a neces‐ sity to gain insight into the sediment process in stormwater ponds for optimization design of stormwater ponds. To address this issue, we propose a novel modeling framework based on discrete phase model (DPM), aiming to fully represent the sediment transport, settling, and resuspension at grain scale under time-dependent conditions. The major influence factors resulting in the significant fluctuation of trap efficiency are still not fully understood [1, 6, 11,12,13,14], such as physical particle characteristics (e.g., sizes and density), pond shape, residence time, vegetation, wind, and turbulence level. Sedimentation, which includes the process of particulates’ transport, settling to the bottom of a water column, and resuspension due to strong flow, is the dominant mechanism of trap efficiency of ponds; gaining insight into the sediment transport process under complex conditions is of great importance and is the key difficulty of this topic
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
