Abstract
The thermal load and high temperature brought by the increase in power of electronic devices or the increase in speed of supersonic aircraft limit the respective development. In this paper, a numerical model of CO2 jet impingement cooling of a constant heat flux plate/concave surface in different phase states was established. Secondly, the non-equilibrium phase transition and the real-thermophysical properties of CO2 was considered. The effects of different wall heat flux (0.7 MW/m2 ∼ 6.5 MW/m2) and initial phase states on the impact cooling performance of CO2 jet were studied.It is found that for SCO2 jet impingement, when the inlet temperature is lower than the pseudo-critical temperature, the heat transfer coefficient increases with the increase of inlet pressure, and the maximum increase is 24.7 %. For near-critical liquid CO2 (LCO2) jet impingement, low latent heat prevents temperature overshoot in the heat flux range studied. With the increase of the proportion of dry ice in the inlet, the heat transfer coefficient also increases. When q > 3 MW/m2, the heat transfer coefficient of dry ice jet impact is 2.5 ∼ 3 times and 1 ∼ 1.4 times of that of SCO2 and near-critical LCO2 jet impingement for the flat plate model, respectively. For concave surface with high heat flux, near-critical LCO2 jet impingement cooling effect is relatively good. In addition, concave surface will aggravate the uneven cooling surface temperature.The results can provide more references for the CO2 jet impingement technology in the design of stagnation cooling system of supersonic aircraft and thermal management of high-power electronic devices.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.