Numerical Investigation of Interlaminar Stress of CRTS II Slab Ballastless Track Induced by Creep and Shrinkage of Concrete.

Abstract

The secondary development of ABAQUS was carried out to calculate the shrinkage and creep of concrete, and a finite element model of the China Railway Track System (CRTS) II slab ballastless track was established. Then, the interlaminar stress of CRTS II slab ballastless track at different ages of the track slab during laying (AOTSL) caused by concrete shrinkage and creep was studied. The obtained results showed that the stress redistribution occurred in the sliding layer, which resulted in the generation of a gap. Although the gap length was slightly reduced due to the shear cogging, the sliding layer at the slab edge is more prone to produce gaps. Under the effect of shrinkage and creep of the ballastless track, large additional shear stress, up to 0.676 MPa, was induced at the interface between CA mortar and the track slab. Meanwhile, the appearance of additional vertical and lateral forces of the shear cogging was caused by the shrinkage and creep of the ballastless track. Additionally, by further analysis, the recommended AOTSL ranges from 120 days to 180 days.