Numerical investigation of hydraulic jump for different stilling basins using FLOW-3D

Abstract

Abstract Stilling basin of the Tuansa barrage is a modified form of the United States Bureau of Reclamation (USBR) Type-III basin, which includes impact baffle and friction blocks. Soon after the barrage's operation, baffle blocks were found to be uprooted. Additionally, previous studies also highlighted the issues of rectangular baffle blocks, i.e., less drag, smaller wake zone, and flow reattachment. On the contrary, the use of wedge-shaped splitter blocks is found limited downstream of diversion barrages. Therefore, this study focuses on the hydraulic effects of wedge-shaped splitter blocks on hydraulic jump (HJ) and energy dissipation using FLOW-3D and confirms its suitability downstream of the diversion barrage. The study mainly investigated the free surface profiles, roller lengths, relative energy losses, velocity profiles, and turbulent kinetic energies for three different stilling basins. The results of free surface profiles indicated that new basins stabilised the HJ and produced smaller lengths of HJ. The results also showed that as the flow increased, the roller lengths decreased in the new basins. Similarly, with an increase in the flow, the relative energy loss increased in new basins. Furthermore, within HJ, and at the basins' end, the results showed higher decay of velocity and turbulent kinetic energy in the new basins.