Numerical investigation of heat transfer enhancement on a porous vortex-generator applied to a block-heated channel

Abstract

The numerical simulation is used to obtain the unsteady laminar flow and convective heat transfer in the block-heated channel with the porous vortex-generator. The general Darcy–Brinkman–Forchheimer model is adopted for the porous vortex-generator. The parameters studies including porosity, Darcy number, width-to-height ratio of porous vortex-generator and Reynolds number have been explored on heat transfer enhancement and vortex-induced vibration in detail. The results indicate that heat transfer enhancement and vortex-induced vibration increase with increasing Reynolds number and width-to-height ratio. However, the porosity has slight influence on heat transfer enhancement and vortex-induced vibration. When Darcy number is 10−3 or 10−4, installing a porous vortex-generator with B/h=1.0 improves overall heat transfer the best along heated blocks, and has a strong reduction of vortex-induced vibration.