Abstract
We currently notice a substantial growth in the wind energy sector worldwide. This growth is expected to be even faster in the coming years. This means that a massive number of wind turbine blades will be produced in the forthcoming years. There is a large potential for materials savings in these blades. The analysis of designed blade is done in dynamic loading. Five types of spars cross-section are taken in this work. The blade and spar are of composite material. The Finite element modal analysis of designed blade is done in ABAQUS. The scope of the present work is to investigate the structural modal analysis of full-scale 48m fiberglass composite wind turbine blades for 5MW horizontal axis wind turbine and through this to assess the potential for materials savings and consequent reductions of the rotor weight. The entire wind turbine can benefit from such weight reductions through decreased dynamics loads and thus leave room for further optimization. A numerical work has been used to address the most adequate spar shape and to get an understanding of the complex structural behavior of wind turbine blades. Five different types of structural reinforcements helping to prevent undesired structural elastic mechanisms are presented. Comparisons of the eigenfrequencies observed in the full-scale tests are presented and conclusions are drawn based on the mechanisms found.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.