Abstract
This research focuses on the effect of overlap ratio on the performance of Savonius rotor in the presence of inner blades in such a way that inner blade tip is parallel to the main blade tip and root. Findings reveal that at low overlap ratios, using inner blade that the inner blade tip is parallel to the main blade root leads to a higher power and torque coefficients than the other inner blade configuration and also conventional rotor. This research indicates that for the overlapped rotor and for the two inner blade configurations, the higher power and torque coefficients could be obtained at high and low tip speed ratios, respectively. Results show that for both inner blade configurations, the overlapped rotors overcome the negative torque generated by the non-overlapped one. It is also shown that at high overlap ratio, using inner blade has no advantage over the conventional rotor.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.