Numerical investigation and loss estimation of high-pressure turbine cascade flow with contoured endwall and incoming wakes

Abstract

With the aim of suppressing the irreversible losses, the secondary flow at endwall and incoming vortices interactions are assumed to be the most concerned physics in gas turbine for modern aero-engine and military vehicles. However, the combining effect of contoured endwall and incoming periodic wakes were seldom discussed previously. In the present work, the research subject is the high-pressure turbine cascade with non-axisymmetric endwall and incoming wakes induced by moving bar fulfilled with periodic boundary conditions in pitchwise direction. Firstly, the aerodynamics and thermodynamics in the turbine cascade with secondary flow control technique, which denotes to non-axisymmetric endwall, were experimentally and numerically investigated. For what concerns the profile aerodynamic loadings, total pressure loss coefficients and vortices coefficient were surveyed to quantify the influence of interaction between incoming wakes and secondary flow at contoured endwall. The cumulative difference of entropy production rate associated with dissipation is then employed to evaluate the loss under different inflow condition. Combined with dynamic mode decomposition (DMD) method, the energy loss features associated with incoming wakes at different passing frequencies was captured. The results indicated that the flow separation at the suction wall with the axial position of 70%∼80% Cax upstream trailing edge was suppressed in the cases with incoming wakes for high pressure turbine cascade. And stronger incoming wakes tends show better suppression effect on the flow separation. However, when combined with contoured endwall, the negative influence of non-axisymmetric endwall at the middle passage was enlarged. And the general aerodynamics of the cascade flow may not be necessarily improved in term of energy loss characteristics with the increase of passing frequency of incoming wakes. The present work preserves guiding significance for the design and flow control of high pressure turbine cascade.