Abstract
Longitudinal damping derivatives, [Formula: see text], of an aerial vehicle is important from an aerodynamic stability point of view. Experimental calculation of longitudinal damping derivatives using wind tunnel is not a cost-effective method; therefore, researchers have developed numerical solutions as an alternative. In this research, the longitudinal damping derivatives of a flying wing micro aerial vehicle (FWMAV) were calculated using numerical simulations by adopting pull-up maneuver and forced harmonic motion in pitch axis. Pull-up maneuver with four steady rotational rates was simulated to obtain pitch rate derivative, C mq. Combined derivative, [Formula: see text], was obtained by simulating forced harmonic motion of FWMAV around a mean angle of attack of 0° with amplitude of oscillation of ± 3° using four reduced frequencies (0.02, 0.03, 0.04, and 0.05). Unstructured surface and volume mesh was used in a spherical domain engulfed inside a large cuboid domain for moving reference frame strategy. Reynolds number taking mean aerodynamic chord as a reference length was 2.33 × 105. Spalart–Allmaras turbulence model was used. Pitch rate derivative, combined derivative, and acceleration derivative were found as − 0.03/rad, − 7.39/rad, and − 7.36/rad, respectively, by the use of a phase method at a reduced frequency of 0.03. During flight dynamic analysis, it was found that [Formula: see text] has a significant contribution on damping in short period mode with no effect on Phugoid mode. The research concluded that for tailless configurations, acceleration derivative [Formula: see text] can exist and can provide necessary damping in the longitudinal flight mode.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.