Numerical Design of Stepped Compound Horn with Longitudinal-Torsional Vibration under Single Acoustic Excitation

Abstract

The mechanism of longitudinal-torsional vibration (LTV) realized by using converter with multiple diagonal slits (MDS) was analyzed based on the acoustic wave propagation when acoustic wave enters obliquely from steel to air. The influences of geometrical parameters of the stepped compound horn with multiple diagonal slits on natural frequencies of LTV were studied with finite element analysis (FEA). The design procedure of stepped compound horn with LTV was provided. The vibration characteristics of actual horn were analyzed with simulation and test. The FEA results show that LTV of the output end of the stepped compound horn may be realized when the input end is excited by longitudinal vibration at certain natural frequency if suitable geometrical dimensions are selected, and the amplitude of the horn is periodical; the trajectory of the particle in the output end is helical curve. The test results indicate that LTV may be realized by stepped compound horn under single acoustic excitation, and the vibration frequency is close to the simulation result, and its vibration properties are good. This method may be applied to design the acoustics system of ultrasonic machining with LTV under single acoustic excitation.