Abstract

A series of computational fluid dynamics (CFD) simulations has been conducted to analyze the heat transfer enhancement in a fully heated rod bundle with mixing-vane spacers. The predicted Nusselt numbers downstream of the split-vane spacer are compared with the available experimental measurements and with correlation. The CFD calculations at Re = 28000 and 42000 showed a lower heat transfer enhancement close to the space grid but a good agreement of the decay rate with the fully heated experimental data at ~6Dh downstream of the grid. The CFD simulations also showed a maximum enhancement of the heat transfer at 6 to 7Dh downstream of the split-vane spacer due to the multiple vortices predicted near the spacer. In addition, the present paper compares the thermal-hydraulic performance of two different mixing vane spacers, i.e., a split-vane spacer and a hybrid-vane spacer, based on CFD simulations at a pressurized water reactor’s operating conditions. The split vane is predicted to have a higher overall heat transfer enhancement but a lower local heat transfer far downstream of the spacer where the minimum departure from nucleate boiling ratio is anticipated.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.