Numerical Calculation of H2-HT Separative Performances up to −0.3 MPa of Thermal Diffusion Column with Fairly Higher Hot-Wire Temperature

Abstract

By using the two-dimensional rigorous numerical solution of flow and convection-diffusion equations, the H2-HT separative performances of thermal diffusion column with 15 mm-radius and 288.15K cold-wall was analyzed up to −0.3 MPa for higher hot-wire temperature (up to −1,700K). Flow analysis has revealed: (1) The magnitude of the free convection is almost proportional to the pressure, and laminar solution of free convection could not be obtained at the pressure more than −0.32 MPa. (2) The magnitude of the free convection increases gradually with ΔT (the temperature difference between hot and cold surfaces), when ΔT<–800 K. In the range of larger ΔT, the magnitude is almost constant or rather decreases gradually with ΔT. As a result, the laminar solution could always be obtained at the pressure less than −0.32 MPa, no matter how large ΔT may be. Separative analysis for H2-HT isotope separation has made clear that the thermal diffusion column with 288.15 K cold-wall should be operated at (1) 0.15–0.2 MPa,...