Numerical assessment of using FRP rebars as an alternative passive reinforcement in RC beams

Abstract

AbstractRecent sustainable building strategies make the right decisions to be environmentally friendly and reduce carbon emissions. In some reinforced concrete (RC) elements, fiber-reinforced polymer (FRP) bars have been proposed as an alternative to conventional steel bars. The demand for using noncorrosive and/or nonmetallic reinforcing bars in various reinforced concrete projects has increased. Although these concrete elements are lightweight, have a long lifespan, and need little maintenance, their non-ductile nature and bond with the surrounding concrete create significant challenges. Several experimental investigations have been conducted to evaluate the behavior of RC elements, even with their high cost. This study aims to assess numerically the viability of using FRP bars instead of traditional steel ones in simply supported reinforced concrete beams (RCBs) as longitudinal reinforcement (passive reinforcement). Utilizing the three-dimensional (3D) nonlinear finite element analysis (FEA) software (ABAQUS), a total of eighteen models were carried out to validate the results available in reference case studies with FRP bars. The verification of the numerical results has been verified by comparing them with the reference experimental data. Next, in order to assess the rigidity of such RCBs with FRP bars, parametric research was carried out. The numerical results proved that RCBs with FRP bars have a positive impact on enhancing load-carrying capacities. But on the other hand, the strain energy of such RCBs with CFRP bars is reduced to about 75% of the strain energy of RCBs with steel bars, which leads to low beam ductility.