Numerical approach to study the thermal-hydraulic characteristics of Reactor Vessel Cooling system in sodium-cooled fast reactors

Abstract

The main vessel plays an important role in containing the entire primary sodium for pool-type sodium-cooled fast reactors (SFRs). The Reactor Vessel Cooling System (RVCS) has great effect on cooling the main vessel. However, little attention has been given to the study on transient characteristics of RVCS in the previous SFR research. Thus, a home-made one-dimensional (1-D) code named Reactor Vessel Cooling system Analysis Code for Sodium-cooled fast reactor (VECAS) is proposed to evaluate the thermal-hydraulic characteristics for SFR. The detailed models of the developed VECAS are presented in this paper. Moreover, the developed models have been validated against an experimental study. Numerical data of the main vessel cooling circuit are compared with the measurements of the Demonstration Fast Breeder Reactor (DFBR). The simulation results are in good agreement with the experimental data. Furthermore, the validated VECAS is coupled with the Transient Thermal-Hydraulic Analysis Code for Sodium-cooled fast reactors (THACS). The transient characteristics of RVCS in China Experimental sodium-cooled Fast Reactor (CEFR) are simulated by the coupled code. Steady analysis shows that the main vessel is cooled effectively. The peak temperature appears at the top of the main vessel lower than the permissible upper temperature limit. During the transient analysis, VECAS has predicted a reverse flow in RVCS, which contributes to the core cooling. Furthermore, sensitivity analysis of the main parameter has also been performed. Therefore, it can be concluded that coupled VECAS has the ability to evaluate the thermal-hydraulic characteristics as well as the decay heat removal capacity of RVCS. The coupled code could provide references and technical supports for the design and optimization of the pool-type sodium-cooled fast reactor.