Abstract
This study investigated numerically and experimentally fluid flow and heat transfer in the desktop PC. Three patterns of the positions of air inlet and outlet were tested to find the best one for cooling. The computer components in the present study are CPU, finned heat sink, power supply, motherboard, CD, HDD and fans. Three components which were generate heat are CPU, motherboard and power supply and there were two openings for air inlet and two for air outlet. The air inlet velocities were 1.2, 1.8, 2.4 m/s with constant CPU fan velocity. The studied parameters were the changed of inlet air velocity, powers of CPU, motherboard and PSU and the positions of inlet air. The numerical results obtained are found in a good agreement with the experimental results. The experimental results show that the maximum temperature was 81 at 16.5 W and 1.2 m/s. Numerical results showed that the CPU temperature reaches 89.6 at 18.5 W and 1.2 m/s. From the results, it was found that; the temperatures of the main components (PSU and motherboard) affected little by CPU power and vice versa, the finned heat sink has higher cooling efficiency and the pattern 1 was the best pattern for CPU cooling.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
