Abstract

In the present research, the effects of four 90-degree horizontal elbows with different curvature radii (17, 34, 51, and 68 cm) and an identical rectangular cross-section (20 * 34 mm) on a gas–liquid slug flow pattern have been studied experimentally and numerically. Gas and liquid superficial velocities in numerical and experimental parts were set in 2.5 m/s and 0.44 m/s, respectively. In the computational fluid dynamics section, the distribution of volume fraction, velocity, pressure, turbulence intensity, and swirling intensity parameters were investigated using the VoF model and the SST k-ω method. Experimental studies were conducted utilizing pressure data and signal processing tools to study the dominant frequency of slug flow alongside bandwidth distribution as well as the Shannon entropy. The results exhibited that although the dominant frequency of slug flow did not change after passing the 90-degree elbow, the frequency signal's bandwidth increased. In this regard, the application of Shannon entropy quantity revealed that the frequency distribution signal experienced a greater increase in bandwidth as the elbows’ curvature radius increases. The turbulent intensity of the elbows’ outlet reveals that by increasing the curvature radius, the flow field behaves smoother. Also, swirling intensity distribution shows that decreasing the elbow radius leads to increment in the swirling intensity.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.