Abstract
A study on vortex injection in hybrid rocket engines with nitrous oxide and paraffin has been performed. The investigation followed two paths: first, the flowfield was simulated with a commercial computational fluid dynamics code; then, burn tests were performed on a laboratory-scale rocket. The computational fluid dynamics analysis had the dual purpose to help the design of the laboratory motor and to understand the physics underlying the vortex flow coupled with the combustion process compared with axial injection. Vortex injection produces a more diffuse flame in the combustion chamber and improves the mixing process of the reactants, both aspects concurring to increase the efficiency. A helical streamline develops downstream of the injection region, and the pitch is highly influenced by combustion, which straightens the flow due to the acceleration in the axial direction imposed by the temperature rise. Experimental tests with similar geometry have been performed. Measured performance shows an increase in regression rate up to 51% and a efficiency that rises from less than 80% with axial injection up to more than 90% with vortex injection. Moreover, a reduction of the instabilities in the chamber pressure has been measured.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.