Numerical and Experimental Approach to Characterize a BLDC Motor with Different Radial-gap to Improve Hemocompatibility Performance.

Abstract

Left ventricular assist devices (LVADs) have increasingly been used clinically to treat heart failure patients. However, hemolysis, pump thrombosis, infection and bleeding still persist as major limitations of LVAD technology. Assessing LVAD hemocompatibility using a blood shear stress device (BSSD) has clear advantages, as the BSSD could provide a better experimental platform to develop reliable, quantifiable blood trauma assays to perform iterative testing of LVAD designs. In this study, a BSSD was proposed with short blood exposure time and no seals or contact bearings to reduce blood trauma caused by the test platform. Enlarged air-gap drive motor in BSSD is essential to avoid high shear stress; however, it would significantly reduce the motor torque, which may result in inadequate force to drive the entire system. In order to evaluate and optimize the drive motor air-gap to ensure adequate motor torque as well as acceptable range for blood exposure time and shear stress, a numerical brushless DC (BLDC) motor model was established using finite element method (FEM) in numerical simulation software COMSOL. The model was first validated by the experimental results. Then numerical model with different air-gap was evaluated on the torque and speed constant changes. In the end, two equations were generated based on the curves derived from the torque and speed constant calculations. Determining these relationships between motor performance and motor air-gap will facilitate the development of an appropriate BLDC motor size for the BSSD, considering the design limitations in our future work.