Numerical and Analytical Determination of Rockburst Characteristics: Case Study from Polish Deep Copper Mine

Abstract

A simplified analytical method useful for ductile ground support design in underground mine workings is presented. This approach allows for maintaining the stability of sidewalls in rectangular openings extracted in competent and homogeneous rocks, especially in high-pressure conditions, favoring rockburst event occurrence. The proposed design procedure involves the typical assumptions governing the limit equilibrium method (LEM) with respect to a triangular rock block expelled from a sidewall of a long mine excavation subjected to normal stresses of the values determined based on the Maugis’s analytical solution concerned with stress distribution around the elliptical opening extracted within the homogeneous infinite elastic space. This stage of the local assessment of rock susceptibility to ejection from the walls of the excavation allowed for determining the geometry of the block whose ejection is most likely in a given geological and mining situation. Having extensive information about the geometry of the excavations and the properties of the surrounding rocks, it was possible to make an exemplary map of the risk from rockburst hazard, developed as the 2D contours of safety indexes’ values, for special-purpose excavations such as heavy machinery chambers, main excavations, etc. in conditions of selected mining panel of the deep copper mine at Legnica-Głogów Copper Basin, Poland. Another important element of the obtained results is the calculated values of the horizontal forces potentially pushing out the predetermined rock blocks. These forces are the surplus over the potential of frictional resistance and cohesion on the surfaces of previously identified discontinuities or on new cracks appearing as a result of overloading of the sidewalls. Finally, the presented algorithm allows us to perform quantitative tracking of rockburst phenomena as a function of time by determination of acceleration, velocity, and displacement of expelled rocks. Such information may be useful at the stage of designing the support for underground workings.