Abstract
The paper adopts the interface element to simulate the joints so as to systematically and quantitatively study the deformation around tunnel, the mechanic state of lining and the stability under different inclining angles of joints. The result shows that the deformation around tunnel deteriorates mainly along the joint during the inner convergence effects of surrounding rock. When the inclining angle α=45°, the deformation around the tunnel is most serious, followed by that when α=90°, α=60°, α=30° and α=0°. At the same time, the influence of inclining angle on the distribution of the axial force of lining is comparatively small. But the distribution of bending moment and shear change obviously where the joints penetrate the tunnel. The tunnel stability of surrounding rock is the poorest when α=90° and the tunnel is most stable when α=0°. The stability of surrounding rock changes little when α is between 30° and 60°. The research result provides an effective calculation method for the forecast of deformation, the design of structure and the stability analysis of jointed tunnel. It is also helpful for the monitoring of construction and calculation of jointed tunnel in the future.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have