Abstract
AbstractThe plate-load test (PLT) is widely performed at large dam sites to determine the rock mass deformability. Analytical relations based on the theory of elasticity, as suggested by the International Society for Rock Mechanics and the American Society for Testing and Materials test standards, are commonly used to interpret the test results and calculate the rock mass deformation modulus. However, because of inconsistency of the test gallery geometry with the half-space medium assumption embedded in the analytical relations, a systematic error occurs in the calculation of the deformation modulus. Furthermore, when the tests are conducted on jointed rock masses, the test results show a considerable scatter, mainly due to the anisotropy of the deformability of jointed rock masses. In this paper, numerical modeling is used to interpret the results of a series of PLTs conducted at the Bakhtiary dam site in southwest Iran. An equivalent continuum model, called JointedRock, is used to back-calculate the sti...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
