Abstract
Abstract Changes in relative humidity of the ambient air, RH (%), cause wetting and drying of wood material, which results in non-uniform moisture contents or moisture gradients, and consequently in moisture-induced stresses and strains in the glued-laminated timber (glulam) members. The aim of the present paper is to perform a hygro-mechanical analysis to predict the mechanical behavior of glulam specimens exposed to two RH regimes, causing wetting from 50% to 90% RH and drying from 90% to 50% RH, and compare the numerical to the experimental results. The aims are also to quantitatively analyze the influence of characteristic material parameters required in the multi-Fickian moisture transport model and the mechanical model on moisture-induced strains and stresses in glulam specimens and to determine the possibility of cracking of the material by analyzing the maximum tensile stresses perpendicular to the grain. Accurate numerical predictions of moisture contents and moisture-induced strains are obtained in the glulam specimens during wetting and drying as compared to the experimental results. The influence of a particular characteristic material parameter on moisture-induced strains and stresses is characterized as significant, but not crucial when a rough numerical estimation of the mechanical behavior of the glulam beam exposed to RH changes is required.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
