Abstract

The two-dimensional steady and time-dependent fluid flow and heat transfer through periodic, wavy channels is numerically studied, for a fluid with a Prandtl number of 0.7, by means of an unstructured covolume method. The two geometrical configurations considered, a sinusoidal channel and an arc-shaped channel, are shown to provide little or no heat transfer augmentation, in comparison to a parallel-plate channel, in steady flow regimes at lower values of the Reynolds number. In addition, they both have higher pressure drop than that of the parallel-plate channel under fully developed flow conditions. For the unsteady regime, reached at about Re=175–200 for the sinusoidal channel, and Re=60–80 for the arc-shaped channel, both geometries exhibit a significant increase in the heat transfer rate, up to three times for the highest Reynolds number investigated. This increase is higher for the arc-shaped flow passage, but is accompanied by a higher friction factor than that of the sinusoidal channel.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.