Numerical analysis of axial load effects on RC bridge columns under blast loading

Abstract

Blast load and its effects on transportation infrastructure especially bridge structures have received considerable attention in recent years. The RC bridge columns are considered as the most critical structural members because their failure leads to collapse of the bridge. Although RC bridge columns are typical axial load-carrying components, the studies on blast-resistant capacity of RC bridge columns usually neglect the axial load effect since it is commonly assumed that neglecting the axial load leads to conservative predictions of column responses. This assumption is true when column failure is governed by flexural response since axial compressive load generates a prestress in column which compensates concrete tensile stress induced by bending response. When subjected to blast loads, column response however could be governed by shear response. In this case neglecting axial loading effect does not necessarily lead to conservative predictions of column responses. In this study, high-fidelity finite element (FE) models for both non-contact explosion and contact explosion were developed in LS-DYNA. The FE models were validated with field blast test data. Subsequently, intensive simulations of the RC bridge columns with and without axial load subjected to a wider range of blast loading scenarios, including far-field, near-field and contact explosion were conducted. The influence of axial load on the dynamic performance of RC bridge columns corresponding to different blast loading scenarios was discussed.