Abstract

Abstract Solar photovoltaic (PV) system harness the energy from the sunlight and convert into clean electricity to power homes and businesses. During an operation the solar panels get hot, the electrons inside the solar cells pick up that extra heat energy which puts them in a more excited state and when they are already excited, they have less room to absorb the energy from sunlight. As a result, electrical performance of a PV system reduces with increase in solar cell temperature. Efficiency of PV panels can be retained by establishing a hybrid PV-Thermal (PV-T) system. In this study, container filled with phase change material (PCM) embedded in porous metal is attached to back surface of the PV cell. As well as, to extract the excess heat from the PV cell, water is used as a heat transfer fluid (HTF) with constant mass flow rate of 30 kg/hr. During the simulation melting rate of PCM, amount of latent heat energy stored, thermal, electrical and overall efficiencies of the PV panel is studied and compared with the conventional PV-T system. The results show the enhanced melting fraction of PCM by 6% and 8% for the PV-T/PCM/Cu and PV-T/PCM/Al system, respectively compared with PV-T/PCM system. Moreover, in comparison with the conventional PV-T system, the overall efficiency of the PV-T/PCM/Cu and PV-T/PCM/Al is increased by 10.62% and 8.80%, respectively.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.