Numerical Analysis of a CZTS Solar Cell with MoS2 as a Buffer Layer and Graphene as a Transparent Conducting Oxide Layer for Enhanced Cell Performance.

Abstract

Copper zinc tin sulfide (CZTS) can be considered an important absorber layer material for utilization in thin film solar cell devices because of its non-toxic, earth abundance, and cost-effective properties. In this study, the effect of molybdenum disulfide (MoS2) as a buffer layer on the different parameters of CZTS-based solar cell devices was explored to design a highly efficient solar cell. While graphene is considered a transparent conducting oxide (TCO) layer for the superior quantum efficiency of CZTS thin film solar cells, MoS2 acts as a hole transport layer to offer electron–hole pair separation and an electron blocking layer to prevent recombination at the graphene/CZTS interface. This study proposed and analyzed a competent and economic CZTS solar cell structure (graphene/MoS2/CZTS/Ni) with MoS2 and graphene as the buffer and TCO layers, respectively, using the Solar Cell Capacitance Simulator (SCAPS)-1D. The proposed structure exhibited the following enhanced solar cell performance parameters: open-circuit voltage—0.8521 V, short-circuit current—25.3 mA cm−2, fill factor—84.76%, and efficiency—18.27%.