Abstract
In this paper, a solar hybrid one-rotor two-stage desiccant cooling and heating system has been numerically analyzed. The system was made up of a one-rotor two-stage desiccant cooling unit, with design cooling capacity for 5 kW, and a solar collector array of 15 m2. Performance model of the system was created in TRNSYS simulation studio. Firstly, base case performance models were programmed according to the configuration of the installed solar desiccant system and verified by the experimental data. Secondly, the year-round performance about the system was simulated. Finally, we optimized the parameters of the system, including the solar collector area, the ratio between fresh air and return air, and the heat exchanger efficiency. Numerical results agree with the experimental ones. The simulation results showed that about 60% of the humidity load can be totally handled by the one-rotor two-stage desiccant cooling unit, and about 40% of the heating load can be handled by solar energy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.