Numeric Evaluation of Innovate Spring Machined Nickel-Titanium Rotary Instruments: A 3-dimensional Finite Element Study

Abstract

IntroductionThe purpose of this study was to investigate if machined springs in nickel-titanium (NiTi) rotary instruments can improve their mechanical properties. The bending and torsion properties were assessed using finite element (FE) model analysis. MethodsA basic 3-dimensional file model without a spring was created with apical size #25, 25-mm full length, and 16-mm cutting flutes. Three other models were created with a spring machined into their shaft portion with different numbers of spring coils: standard (STspr), 10% more (INspr), and 10% less (DEspr). To compare the mechanical responses among the 4 FE models, file bending and torsion were simulated using FE analysis. ResultsSpring machined NiTi rotary instruments showed higher torsional resistance and less bending stiffness than the same instrument without. The spring machined models required more torque to bend or rotate the DEspr model than was required for the STspr and INspr models; however, the STSpr and INSpr models were similar. ConclusionsWithin the limitations of this study, the FE analysis indicated that machining a spring into the shaft of NiTi rotary instruments improved torsional resistance and bending flexibility. Therefore, spring machining has the potential to increase the durability of the NiTi rotary instruments.