Novel threading device for central dural tenting sutures: Technical note

Abstract

Central dural tenting sutures are surgical routine procedure in craniotomy which requires passing the thread through a small bone hole, which is time consuming and both physically and mentally stressful. We have developed a novel surgical device to easily perform these procedures and to reduce stress. This study evaluated the convenience, ease, and accuracy compared to conventional methods. We evaluated the time taken using the bone hole threader with an artificial bone model with 10 bone holes. The time required to pass the sutures through the bone hole was compared after 11 neurosurgeons performed using each of three methods twice: one surgeon and another assistant using the conventional method, one surgeon using the bone hole threader, and one surgeon and another assistant using the bone hole threader. These results were statistically analyzed using SPSS. Mean time reduction of 15.9 s was obtained for the bone threader use by one surgeon compared with conventional method by two operators (p = 0.03). Mean time reduction of 24 s was obtained for the bone threader use by two operators compared with one operator (p < 0.01). Use of the bone threader enables time saving even by a single surgeon, and two operators further reduced the required time. Our novel threading device provides a new, quick, and available technique for threading the central dural tenting suture, and will be useful during neurosurgery.