Abstract
The substrate integrated waveguide (SIW) technology allows to construct several types of commonly used antennas in a planar way. However, some practical constraints limit their performances when frequencies below 20 GHz are considered. In the case of SIW horn antennas, the available substrates are much thinner than the wavelength yielding to poor matching and undesired back radiation. In this paper, an innovative structure to overcome these limitations is presented. It consists of a transition printed on the same SIW substrate, which improves both the radiation and the matching performances of conventional SIW horns. The horn shape is also further optimized by reducing its dimensions required for a given directivity. This is obtained by modifying the horn profile in order to effectively combine different TE modes. Guidelines are provided to design this type of thin and compact SIW horn antenna. They were applied to manufacture a prototype in the Ku-band with a substrate thinner than λ0/10. Measurement results validate the proposed concepts showing excellent performances.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.