Abstract

Organic resistive switching memory (ORSM) shows great potential for neotype memory devices due to the preponderances of simple architecture, low power consumption, high switching speed and feasibility of large-area fabrication. Herein, solution-processed ternary ORSM devices doped with bipolar materials were achieved with high ON/OFF ratio and outstanding device stability. The resistive switching performance was effectively ameliorated by doping two bipolar materials (DpAn-InAc and DpAn-5BzAc) in different blending concentration into the PVK:OXD-7 donor-accepter system. Compared with the binary system (PVK: 30 wt% OXD-7), the ON/OFF ratios of the ternary devices doped with 6 wt% DpAn-5BzAc were greatly increased from 7.91 × 102 to 4.98 × 104, with the operating voltage (∣V set–V reset∣) declined from 4.90 V to 2.25 V, respectively. Additionally, the stability of resistance state and uniformity of operating voltage were also significantly optimized for the ternary devices. For comparison, ternary devices doped with DpAn-InAc have been explored, which also achieved improved resistive switching behavior. A detailed analysis of electrical characteristics and the internal charge transfer properties of ORSM was performed to unveil the performance enhancement in ternary devices. Results indicate that the use of bipolar materials favors the efficient operation of OSRMs with proper energy level alignment and effective charge transfer.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.