Abstract
In this work, a novel co-precipitation coupled solvothermal procedure is proposed to prepare a SmMnOx catalyst (SmMnOx-CP + ST) with a reed flower-like structure for the selective catalytic reduction of NOx by NH3 (NH3-SCR). Over 90% NOx conversion and N2 selectivity was achieved at a low temperature range (25–200 °C), and 96% NOx conversion was achieved in the presence of 100 ppm SO2 at 75 °C. While the NH3-SCR of the SmMnOx catalysts prepared by co-precipitation (SmMnOx-CP) and solvothermal (SmMnOx-ST) methods performed much poorer than the SmMnOx-CP + ST catalyst. All catalysts were characterized by XRD, BET, SEM, XPS, H2-TPR, NH3-TPD, NOx-TPD, and FT-IR. The results revealed that the superior performance of the SmMnOx-CP + ST is due to the unique reed flower-like structure morphology, which endows the SmMnOx-CP + ST with the largest surface area, the strongest synergistic reaction of Sm and Mn, abundant surface oxygen species and surface active sites, and significantly enhances the redox ability. Furthermore, the amorphous reed flower-like structure showed strong short-range ordered interaction between the active components and weaken the formation of sulfates species. In addition, the highest content of Mn4+ and Mn3++Mn4+ greatly promotes the redox cycles of Sm2+↔Mn4+ and Sm2+↔Mn3+, and suppresses the production of sulfate species in the presence of SO2.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.