Novel Modular Fractional Slot Permanent Magnet Machines With Redundant Teeth

Abstract

In order to ease the manufacture process of very large permanent magnet (PM) machines, such as direct drive wind power generators, modularity technique is usually adopted. Although conventional fractional slot PM machines with all teeth wound windings show good performance, the coils located at the end part of each segment could be easily damaged because of being exposed to the air. In addition, the local winding faults could easily proliferate to the whole machine due to the physical touch of adjacent coils. Thus, a novel modular fractional slot PM machine with redundant teeth is proposed in this paper, while three phases within each set of winding are still balanced. The construction of the proposed modular PM machine having 42-slots/32-poles (42S/32P) combination is described in detail as an example, which can be treated as the integration of six 6S/5P segments and a redundant 6S/2P machine. The reason for using 6S/2P machine is to get rid of the undesirable unbalanced magnetic force (UMF), which usually exists in rotating asymmetric machines, such as 3S/2P PM machine. Since the end part of each segment in the proposed modular PM machine can be covered by half redundant tooth during the production, more protection can be provided for coils located in these regions. Furthermore, the separation of six segments can improve the fault-tolerant capability of the machine. The electromagnetic performance predicted by finite-element analysis (FEA) also demonstrates that the proposed modular machine will perform better if dual three-phase winding is adopted. Finally, the experiments on the prototyped machine validate the analysis in the paper.