Abstract
A common theme in the application of through-thickness reinforcement is the desire to minimize/eliminate any reduction in in-plane properties. In this work a novel method of reinforcement is introduced using a polymer/fibre pin. Similar in concept to the traditional metalworking process of riveting these pins are placed through the thickness with deliberate excess length. The application of heat and pressure deforms the exposed ends of the pin against the part surface. The resultant preform maintains its shape and may be re-formed with further heat and pressure with the reinforcement conforming to the desired shape. Samples manufactured using this method are tested under quasi-static tensile loading and show no significant change in properties due to the pin addition. Samples tested under mode 1 show further refinement of the manufacture method is required, with shallow pin angles resulting in sub-optimal performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
