Abstract
AbstractUltraviolet‐curable nanocomposites containing organically modified nanoclays were prepared to serve as barrier coatings against oxygen and water permeation. A novel in situ synthesis technique was used to produce well‐dispersed clays in an unsaturated polyester polymer before crosslinking. The in situ dispersion route was compared with nanocomposites prepared by mixing and sonication for several levels of nanoclay loading (1, 2, 5, and 10 wt %). The comparison of nanocomposite properties prepared from each processing method demonstrated that the in situ preparation technique led to better clay dispersion as verified by transmission electron microscopy. The in situ route for nanoclay dispersion produced nanocomposites with lower water vapor transmission and permeability compared with the sonicated dispersion method. The impact on cure characteristics, mechanical properties, thermal stability, and optical clarity of the nanocomposites were also compared. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
