Abstract
This paper reports a validated high-performance liquid chromatography method which is rapid, highly specific, and accurate for determination of cefazolin sodium in injec table pharmaceutical formulations. Separation was carried out using a Hibar ® µBondapak ® C 18 column with a mobile phase consisting of an acetonitrile to monobasic sodium phosphate buffer ratio of 17:83 and a flow rate of 1.0 mL per minute, and monitoring at a wavelength of 254 nm. The calibration curve was linear, with a correlation coefficient .0.9995 in the range of 5-100 µg/mL. Drug recovery was 98.35%-100.86%, with a limit of detection of 12.92 ng/mL and a limit of quantification of 43.09 ng/mL. The drug was subjected to stress conditions of hydrolysis (acid, base, oxidation, and thermal degradation), where maximum degradation was observed. Forced degradation studies confirmed stability indicating power of this method, which was validated in accordance with International Conference on Harmonization guidelines and used successfully to quantify the amounts of cefazolin sodium in bulk injectable formulations
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.