Abstract
This paper presents a novel numerical method through which less mesh-sensitive local stress calculations can be achieved based on the 3D solid finite element, adhering strictly to the original definition of hot spot stress. The traction stress, which is defined at 0.5t and 1.5t away from the weld toe, was calculated using either a force equivalent or work equivalent approach, both of which are based on the internal nodal forces on the imaginary cut planes. To confirm the validity of the proposed method, 5 typical welded joints widely used in ships and offshore structures were analyzed using 5 different solid element types and 4 different mesh sizes. Finally, the methodology was applied to the more complicated pontoon-column connection part of a semi-submersible RIG under a realistic wave load, and the performance of the proposed method was compared with the traditionally used surface stress extrapolation method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.