Abstract
A novel lateral dual-axis a-Si/SiO2 waveguide Bragg grating based quad-beam accelerometer with high-resolution and large linear range has been presented in this paper. The sensor consists of silicon bulk micromachined proof mass suspended by silica beams. Three ridge gratings are positioned on the suspending beam and proof mass to maximize sensitivity and reduce noise. Impact of external acceleration in the sensing direction on the Bragg wavelength of gratings and MEMS structure has been modelled including the effects of strain, stress and temperature variation. Acceleration induces stress in the beam thus modifying the grating period and introducing chirp. The differential wavelength shift with respect to reference grating on the proof mass is the measure of acceleration. To compensate for the effect of the weight of the proof mass and increase the sensitivity of the sensor, electrostatic force of repulsion is applied to the proof mass. For the chosen parameters, the designed sensor has a linear response over a large range and a sensitivity of 30 pm/g. The temperature of surroundings, which acts as noise in sensor performance is compensated by taking differential wavelength shift with respect to reference grating. By design and choice of material, low cross-axis sensitivity is achieved. The proposed design enables a high-resolution well below 1 μ g/ Hz and is suitable for inertial navigation and seismometry applications.
Highlights
Microelectromechanical systems (MEMS) technology finds various applications because of low cost, small size, ease of fabrication and reliable performance
Since PIC components are generally based on a silicon/SOI platform, we present a planar Bragg grating high-resolution dual-axis accelerometer on silicon substrate
We present the design and analysis of high-resolution integrated waveguide Bragg grating based optical MEMS quad-beam lateral two-axis accelerometer with a large linear range
Summary
Microelectromechanical systems (MEMS) technology finds various applications because of low cost, small size, ease of fabrication and reliable performance. High resolution FBG based accelerometers have been demonstrated when used in combination with other resonant structures like ring resonators [37], a Fabry-Pérot (FP) cavity [38], Π-shifted fibre Bragg gratings (PSFBG) [35], ultrastable lasers [34,39] and actively locked lasers using radio-frequency modulation [35,40]. Since PIC components are generally based on a silicon/SOI platform, we present a planar Bragg grating high-resolution dual-axis accelerometer on silicon substrate. We present the design and analysis of high-resolution integrated waveguide Bragg grating based optical MEMS quad-beam lateral two-axis accelerometer with a large linear range.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.