Novel hafnium containing steels for power generation

Abstract

There is clear evidence that creep damage in power plant steels is associated with grain boundary precipitates. These particles provide favourable nucleation sites for grain boundary cavities and microcracks. The formation of M23C6 carbides as grain boundary precipitates can also lead to grain boundary chromium depleted zones which are susceptible to corrosive attack. Such precipitates are the causing loss of creep life in the later stages of creep because of their very high coarsening rate. Through Monte Carlo based grain boundary precipitation kinetics models, combined with continuum creep damage modelling it is predicted that improvements in creep behaviour of power plant steels can be achieved by increasing the proportion of MX type particles. Studies of a Hf containing steel have produced improvements in both creep and corrosion properties of 9%Cr steels. Hf has been ion implanted into thin foils of a 9 wt-%Cr ferritic steel to study its effect on precipitation. Two new types of precipitates are formed, Hf carbide, (an MX type precipitate) and a Cr–V rich nitride, with the formula M2N. The Hf carbide particles were identified using convergent beam diffraction techniques, and micro-analysis. The nanosized particles are present in much higher volume fractions when compared to VN volume fractions in conventional power plant ferritic steels. Furthermore it is confirmed that the Hf causes the removal of M23C6 grain boundary precipitates. This has led to an increased concentration of Cr within the matrix, reduced chromium depleted zones at grain boundaries, and increased resistance to intergranular corrosion cracking.