Abstract
Super-hydrophobic and super-hydrophilic aluminum (Al) surfaces were fabricated via electrochemical surface modification (ECSM) in neutral NaClO3 electrolyte without the addition of secondary chemical coatings. The effects of processing time and applied potential on the surface roughness and wettability were studied. The aluminum surface was characterized using stylus profilometer and scanning electron microscope (SEM). Wettability was evaluated using Sessile Drop Test and a high resolution camera. Results show that surfaces obtained hierarchical rough features and super-hydrophilic behavior after pulse electrochemical machining. Heat treatment at 200°C transitioned the substrates to exhibit super-hydrophobic behavior due to the removal of all moisture from within the micro- and nano-meter scale features on the aluminum surfaces, allowing for the reformation of a natural passivation (oxide) layer with atmospheric interaction. The method proposed in this study for producing super-hydrophobic aluminum surfaces does not require the use of acid or base etching or chemical coatings, such as flouroalkylsilane (FAS). Experimental results reveal increase in contact angle, with increase in applied potential, and decrease in sliding angle.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
